Fiber; Figure 2-17 Dc Power Connector; Table 2-24 Technical Specifications Of The Dc Power Cable; Table 2-25 Type And Usage Of The Fiber - Raisecom Gazelle S1020i-LI User Manual

Raisecom
Gazelle S1020i-LI (A) User Manual

Figure 2-17 DC power connector

Technical specifications
Table 2-18 lists technical specifications of the DC power cable.

Table 2-24 Technical specifications of the DC power cable

Connector
Cable gauge
The Gazelle S1020i-LI is only equipped with the power connector instead of power cables.
You can make power cables on site as required according to technical specifications.

2.7.5 Fiber

Introduction
The Gazelle S1020i-LI supports the Single-Mode Fiber (SMF) and Multi-Mode Fiber (MMF).
These two kinds of fiber are the same in appearance but different in color. The yellow one is
the SMF and the orange one is the MMF.
The Gazelle S1020i-LI can be connected to the Optical Distribution Frame (ODF) or optical
interfaces of other devices through fiber.
Table 2-25 lists the type and usage of the fiber.

Table 2-25 Type and usage of the fiber



Parameter
7.62-2-pin-header/RoHS
Copper core multi-strand power cable 18 AWG (0.75 mm
Usage
Connect the Gazelle
S1020i-LI to the ODF
through the Ethernet
optical interface.
Connect the Ethernet
optical interface on the
Gazelle S1020i-LI to
optical interfaces on
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
Local Remote
connector connector
LC/PC LC/PC
LC/PC FC/PC
LC/PC SC/PC
2 Hardware structure
2
)
Type Standard
2-mm SMF ITU-T
G.652
2-mm MMF
2-mm SMF
2-mm MMF
2-mm SMF
29