Load Fail-Safe Settings - DFI 586STE User Manual

PCI IDE 2nd Channel
This allows you to designate an IDE controller card inserted into one of
the PCI slots as your secondary IDE controller.
Enabl e d The IDE controller card is designated as the secondary IDE
controller.
No IDE controller card occupying any of the PCI slots.
Disabled
PCI IDE IRQ Map To
This category is used to configure your system to the type of IDE disk
controller in use.
ISA Designates which ISA slot is installed with an IDE controller
card; that is, if you are using an IDE controller card.
PCI-Auto
The system will scan and determine the PCI slot that is in-
stalled with an IDE controller card.
Primary IDE INT# and Secondary IDE INT#
The Primary and Secondary IDE INT# categories are used to select the
PCI interrupt (A, B, C, or D) that is associated with the connected hard
drives.

Load Fail-Safe Settings

The " Load Fail-Safe Settings" option loads the troubleshooting default
values permanently stored in the ROM chips. These settings are not
optimal and turn off all high performance features. You should use
these values only if you have hardware problems. Highlight this option
on the main menu and press <Enter>. The message below will appear.
Load Fail-Safe Settings (Y/N)? N
If you want to proceed, type <Y> and press <Enter>. The default set-
tings will be loaded.
45