Table of Contents
Advertisement
SC-F10000H Series/SC-F10000 Series
Printing repeating pattern (Step
and Repeat)
You can create and print repeating patterns by placing 1
image and shifting it vertically and horizontally.
The procedure for setting up a pattern is explained
below.
How to create patterns
A
Select the job (image) on which to base the
pattern from the Job List.
B
Click
(Step and Repeat) in the Job Settings
menu.
The setting area changes to the Step and Repeat
settings.
C
Select Enable Setting.
The settings items are enabled.
Check Execute Step and Repeat on the Printer
to process step and repeat and then print on this
printer. In this case, you can only set the size of
the area on which to place the image.
"Step and Repeat Process on the Printer" on
U
page 58
D
Set the size of the area on which to place the
image.
Selecting Layout Area Size lines up and places
the image in the specified size.
If you select a Width for the Layout Area Size
that is wider than the media's width, the image
that extends beyond the media's width is not
printed.
E
Set whether to shift the position of the image.
Select
in Layout Pattern when simply
repeating the image without shifting it.
User's Guide
Introduction
56
Example: Shifted 1/2 vertically
Example: Shifted 1/3 horizontally
Example: Shifted 50 mm vertically
Advertisement
Table of Contents
