Epson SC-F10030H User Manual page 162

SC-F10000H Series/SC-F10000 Series
Item
Print Length Management
Auto Reset
Manual Reset
Media Setting Item
When loading media, select Media Type or register the media settings on the printer using the supplied Epson Edge
Dashboard, to set the optimal media setting values. Normally, use this as it is. When using specific media or when a
problem such as head striking or banding is detected in printing results, change the settings.
The default settings for each of the following items differ depending on the content set in Media Type. See the
following for details on the default settings for each Media Type.
"Media Settings List for Each Media Type" on page 205
U
Item
Change Name
Media Type
User's Guide
Control Panel Menu
Parameter Explanation
*
Select either Off (do not automatically reset the value for print length) or
Off
After Last Page (reset when starting to print the next job).
After Last Page
When Off is selected, the value does not reset until you do Manual Reset.
However, once the value reaches 9999, it automatically resets and returns
to 0.
When After Last Page is selected, the value returns to 0 when printing
starts for the next job so you can check the print length per job. You can
also check how far along the print job is while printing.
When reset is done, the value for print length returns to 0.
Parameter Explanation
Assign a name of up to 20 characters to the media settings being saved.
Using distinctive names makes them easier to differentiate when you
select them.
2 Select Media Type according to the loaded media using media thickness
Ultra-Thin 30g/m
(weight) as a guideline.
2
Thin 50g/m
The guidelines for the paper weight (g/m
follows. The paper weights of each Media Type shown in the screen are
2
Med-Thick 70g/m
typical values.
Ultra-Thin: 39 or less
2
Thick 120g/m
Thin: 40 to 56
Med-Thick: 57 to 89
Thick: 90 or more
The printer stores the optimum media settings according to the Media
Type.
When the Media Type is changed, each setting for media registered to the
current media setting number changes to the value for the Media Type
after changing.
U
"Media Settings List for Each Media Type" on page 205
162
2
) of each Media Type are as