Table of Contents
Advertisement
SC-F10000H Series/SC-F10000 Series
C
When you finish cleaning a media cleaner, install
it to the printer.
Hold the tabs as you insert the media cleaner
until you hear a click.
D
Repeat Steps 2 and 3 to clean all of the media
cleaners.
E
On the screen, press Done.
Cleaning anti-drying caps
When an anti-drying cap needs to be cleaned, the
Cleaning the Anti-Drying Caps. message appears on
the screen, and the cap that needs to be cleaned is
indicated.
When this message appears, follow the steps below to
clean only the indicated cap.
Before starting this procedure, be sure to read the
following.
"Precautions regarding maintenance" on
U
page 106
User's Guide
Maintenance
c
When using a cleaning stick to wipe off a cap, do not
wipe off the area around the hole inside the cap. The
cleaning fluid may get into the hole, causing the cap
to not function correctly.
A
B
112
Important:
If Cleaning the Anti-Drying Caps. appears on
screen, confirm which cap to clean.
The cap that needs to be cleaned is highlighted, as
shown in the illustration.
Press Start.
The print head moves to the right side.
Advertisement
Table of Contents
