Table of Contents
Advertisement
SC-F10000H Series/SC-F10000 Series
Names of parts
G
Job Setting menu & Setting
area
H
Auto Print switching
button
User's Guide
Introduction
Functions
Perform settings, such as printing, layout, and Input/output profile, for idle jobs that are
selected in the Job List (D).
The icons on the right are the Job Setting menu. The content of the setting area changes
depending on the items that are selected. For details, see the help for Epson Edge Print.
Clicking the
in the top right of the setting area closes the setting area so the preview
area is enlarged by that amount. To open the setting area, click one of the items in the Job
Setting menu.
When the setting area is closed, you can minimize/maximize the menu area by dragging
the menu's left edge to the left or right.
Each time this button is clicked, it turns on or off.
By setting it to
, the print jobs start printing in order just by adding print data to the
Job List (D). When there are idle jobs in the Job List, idle jobs are also printed in order.
By setting it to
, the jobs are not printed until after the print data is added to the Job
List, selected, and then printed.
When multiple jobs are put together and nesting or RIP is done before printing, set
to do the nesting and RIP work, and then change it to
51
.
Advertisement
Table of Contents
