Table of Contents
Advertisement
SC-F10000H Series/SC-F10000 Series
Item
Rewind Tension
300x600dpi -1.1pass
300x600dpi -1.5pass
300x600dpi -2.1pass
300x600dpi -3.1pass
600x600dpi -2.1pass
600x600dpi -2.5pass
600x600dpi -3.1pass
600x600dpi -4.3pass
600x1200dpi
-5.0pass
600x1200dpi
-5.0pass HD
1200x1200dpi
-9.0pass HD
Print Quality Adjust‐
ment Limitation Tem‐
perature
Maintenance menu
The Maintenance menu can be accessed directly by pressing
* indicates default settings.
User's Guide
Control Panel Menu
Parameter
Explanation
Normally, use the default setting values. The higher the value, the greater
the tension.
Lv1 to Lv9
If creases appear in the media while printing, we recommend setting a
smaller value. Do the same settings if ink adheres to the back of the media
Lv1 to Lv9
that is being rewound.
Lv1 to Lv9
If thick media cannot be rewound correctly, we recommend setting a
larger value.
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
Lv1 to Lv9
0 to 50 ˚C
Set the temperature difference at which print quality adjustment is not
(32 to 122 ˚F)
executed. If the difference in room temperature and the temperature
around the print head is higher than the set value, a message indicating
the temperature is not appropriate appears on the control panel screen,
and print quality adjustment is not done. Adjust the temperature of the
room before executing print quality adjustment. To ensure the colors you
want to print, maintain a constant room temperature of 18 to 28 ˚C (64.4 to
82.4 ˚F).
.
167
Advertisement
Table of Contents
