Table of Contents
Advertisement
SC-F10000H Series/SC-F10000 Series
During printing, the display switches, as seen in the illustration, and shows the following information and buttons.
(1) File name and thumbnail of image being printed
A thumbnail image may not be shown, depending on the type of RIP being used.
(2) The media's Printed Length, the media's Remaining Print Length, Time until media replacement,
and Pass Mode
Pressing the display area while printing displays the screen to set the display details for (2). Select up
to 2 items that you want to display.
The Time until media replacement shows an estimated time.
(3) Estimate of remaining printing time
(4) Pause (Suspend) button
Appears as the Start button while warming up, until the heater reaches the set temperature. Pressing
this button starts printing, even if the heater temperature is low.
(5) Progress bar
Pausing printing and canceling print jobs
Pressing the Pause button while printing displays a screen for selecting the timing to suspend, press one to select
it.
❏
Immediate pause: Stops printing immediately. When printing is stopped during a print job, printing may be disturbed
when printing is resumed.
❏
Pause between pages: Stops at the end of the page currently printing.
Pressing Resume in the screen during a pause cancels the pause status. Pressing Cancel cancels the print job in
progress and stops printing.
C
Media info
User's Guide
Introduction
24
Advertisement
Table of Contents
