Date And Time - ZyXEL Communications NWA1123 Series User Manual

The following table describes the labels in this screen.
Table 57 Configuration > System > Host Name
LABEL
System Name
System Location
Domain Name
Apply
Reset

13.3 Date and Time

For effective scheduling and logging, the NWA1123 system time must be accurate. The NWA1123 has a
software mechanism to set the time manually or get the current time and date from an external server.
To change your NWA1123's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NWA1123's time and date or have
the NWA1123 get the date and time from a time server.
Figure 79 Configuration > System > Date/Time
Chapter 13 System
DESCRIPTION
Choose a descriptive name to identify your NWA1123 device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Specify the name of the place where the NWA1123 is located. You can enter up to 60
alphanumeric and '()' ,:;?! +-*/= #$%@ characters. Spaces and underscores are allowed. The
name should start with a letter.
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes "-" are accepted.
Click Apply to save your changes back to the NWA1123.
Click Reset to return the screen to its last-saved settings.
NWA1123 Series User's Guide
126