25.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
•
Power, Hardware Connections, and LED
•
NWA1123 Access and Login
•
Internet Access
•
Wireless Connections
•
Resetting the NWA1123
25.2 Power, Hardware Connections, and LED
The NWA1123 does not turn on. The LED is not on.
Make sure you are using the power adaptor included with the NWA1123 or a PoE power injector/switch.
1
Make sure the power adaptor or PoE power injector/switch is connected to the NWA1123 and plugged
2
in to an appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or PoE power injector/switch.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
If none of these steps work, you may have faulty hardware and should contact your NWA1123 vendor.
5
The LED does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
on page
183.
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
C
Troubleshooting
NWA1123 Series User's Guide
198
H A P T E R
Section 2.5 on page 21
25
or
Section 21.5