Date And Time - ZyXEL Communications NWA Series User Manual

16.4 Da te a nd T im e
For effective scheduling and logging, the Zyxel Device system time must be accurate. The Zyxel Device
has a software mechanism to set the time manually or get the current time and date from an external
server.
To change your Zyxel Device's time based on your local time zone and date, click
Syste m > Da te / T im e
date or have the Zyxel Device get the date and time from a time server.
Fig ure 84 Configuration > System > Date/Time
The following table describes the labels in this screen.
Table 63 Configuration > System > Date/Time
L ABEL
Current Time and Date
Current Time
Current Date
Time and Date Setup
Manual
New Time
(hh:mm:ss)
Chapter 16 System
. The screen displays as shown. You can manually set the Zyxel Device's time and
DESC RIPT IO N
This field displays the present time of your Zyxel Device.
This field displays the present date of your Zyxel Device.
Select this radio button to enter the time and date manually. If you configure a new time
and date, time zone and daylight saving at the same time, the time zone and daylight
saving will affect the new time and date you entered. When you enter the time settings
manually, the Zyxel Device uses the new setting once you click
This field displays the last updated time from the time server or the last time configured
manually.
When you set T im e a nd Da te Se tup
Apply
.
NWA/WAC/WAX Series User's Guide
140
to Ma nua l , enter the new time in this field and then click
C o nfig ura tio n >
Apply .