Date And Time - ZyXEL Communications NWA50AX User Manual

The following table describes the labels in this screen.
Table 61 Configuration > System > Host Name
L ABEL
System Name
System Location
Domain Name
Apply
Reset
16.3 Da te a nd T im e
For effective scheduling and logging, the Zyxel Device system time must be accurate. The Zyxel Device
has a software mechanism to set the time manually or get the current time and date from an external
server.
To change your Zyxel Device's time based on your local time zone and date, click
Syste m > Da te / T im e
date or have the Zyxel Device get the date and time from a time server.
Chapter 16 System
DESC RIPT IO N
Choose a descriptive name to identify your Zyxel Device device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Specify the name of the place where the Zyxel Device is located. You can enter up to 60
alphanumeric and '()' ,:;?! +-*/= #$%@ characters. Spaces and underscores are allowed. The
name should start with a letter.
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes "-" are accepted.
Click to save your changes back to the Zyxel Device.
Apply
Click to return the screen to its last-saved settings.
Re se t
. The screen displays as shown. You can manually set the Zyxel Device's time and
NWA50AX User's Guide
139
C o nfig ura tio n >