ZyXEL Communications NWA1123 Series User Manual page 51

The following table describes the labels in this screen.
Table 17 Monitor > Network Status
LABEL DESCRIPTION
Interface Use the Interface Summary section for IPv4 network settings. Use the IPv6 Interface Summary
Summary section for IPv6 network settings if you connect your NWA1123 to an IPv6 network. Both sections
have similar fields as described below.
IPv6 Interface
Summary
Name This field displays the name of the physical Ethernet port on the NWA1123.
Status This field displays the current status of each physical port on the NWA1123.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex setting
(Full or Half).
VID This field displays the VLAN ID to which the port belongs.
IP Addr/Netmask This field displays the current IP address (and subnet mask) of the interface. If the IP address is
0.0.0.0 (in the IPv4 network) or :: (in the IPv6 network), the interface does not have an IP address
IP Address
yet.
IP Assignment This field displays how the interface gets its IPv4 address.
Static - This interface has a static IPv4 address.
DHCP Client - This interface gets its IPv4 address from a DHCP server.
Action Use this field to get or to update the IP address for the interface. Click Renew to send a new
DHCP request to a DHCP server. If the interface cannot use one of these ways to get or to
update its IP address, this field displays n/a.
Port Statistics
Table
Poll Interval Enter how often you want this window to be updated automatically, and click Set Interval.
Set Interval Click this to set the Poll Interval the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting the
Poll Interval and clicking Set Interval.
Switch to Graphic Click this to display the port statistics as a line graph.
View
Name This field displays the name of the interface.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and duplex
setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the NWA1123 on the physical port
since it was last connected.
RxPkts This field displays the number of packets received by the NWA1123 on the physical port since it
was last connected.
Tx Bcast This field displays the number of broadcast packets transmitted from the NWA1123 on the
physical port since it was last connected.
Rx Bcast This field displays the number of broadcast packets received by the NWA1123 on the physical
port since it was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
Chapter 6 Monitor
NWA1123 Series User's Guide
51