Ncc Discovery - ZyXEL Communications NWA1123 Series User Manual

Table 26 Configuration > Network > VLAN (continued)
LABEL
Apply
Reset

7.4 NCC Discovery

You can manage the NWA1123 through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the NWA1123 is behind a proxy server.
To access this screen, click Configuration > Network > NCC Discovery.
Figure 41 Configuration > Network > NCC Discovery
Each field is described in the following table.
Table 27 Configuration > Network > NCC Discovery
LABEL
Enable
Use Proxy to Access NCC
Proxy Server
Proxy Port
Authentication
User Name
Password
Apply
Reset
Chapter 7 Network
DESCRIPTION
Click Apply to save your changes back to the NWA1123.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select this option to turn on NCC discovery on the NWA1123. The NWA1123 will try to
discover the NCC and go into cloud management mode when it is connected to the
Internet and has been registered in the NCC.
If NCC discovery is disabled, the NWA1123 will not discover the NCC and remain in
standalone mode.
If the NWA1123 is behind a proxy server, you need to select this option and configure
the proxy server settings so that the NWA1123 can access the NCC through the proxy
server.
Enter the IP address of the proxy server.
Enter the service port number used by the proxy server.
Select this option if the proxy server requires authentication before it grants access to
the NCC.
Enter your proxy user name.
Enter your proxy password.
Click Apply to save your changes back to the NWA1123.
Click Reset to return the screen to its last-saved settings.
NWA1123 Series User's Guide
68