Nwa1123 Access And Login - ZyXEL Communications NWA1123 Series User Manual

Disconnect and re-connect the power adaptor or PoE power injector to the NWA1123.
4
If the problem continues, contact the vendor.
5

25.3 NWA1123 Access and Login

I forgot the IP address for the NWA1123.
The default IP address (in standalone AP mode) is 192.168.1.2.
1
If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults.
2
See Section 25.6 on page
If your NWA1123 is a DHCP client, you can find your IP address from the DHCP server. This information is
3
only available from the DHCP server which allocates IP addresses on your network. Find this information
directly from the DHCP server or contact your system administrator for more information.
If the NCC has managed the NWA1123, you can also check the NCC's AP > Monitor > Access Point
4
screen for the NWA1123's current LAN IP address.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address (in standalone AP mode) is 192.168.1.2.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the NWA1123.
• If the NCC has managed the NWA1123, you can check the NCC's AP > Monitor > Access Point
screen for the NWA1123's current LAN IP address.
Check the hardware connections, and make sure the LED is behaving as expected. See the Quick Start
2
Guide and Section 2.5 on page 21
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Make sure your computer is in the same subnet as the NWA1123. (If you know that there are routers
4
between your computer and the NWA1123, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP address.
• If there is no DHCP server on your network, make sure your computer's IP address is in the same
subnet as the NWA1123.
Reset the device to its factory defaults, and try to access the NWA1123 with the default IP address. See
5
Section 25.6 on page
Chapter 25 Troubleshooting
205.
or Section 21.5 on page
205.
NWA1123 Series User's Guide
199
183.
I