ZyXEL Communications NWA1123 Series User Manual page 64

Figure 37 Configuration > Network > IP Setting
Each field is described in the following table.
Table 25 Configuration > Network > IP Setting
LABEL DESCRIPTION
IP Address
Assignment
Get Select this to make the interface a DHCP client and automatically get the IP address,
Automatically
subnet mask, and gateway address from a DHCP server.
Use Fixed IP Select this if you want to specify the IP address, subnet mask, and gateway manually.
Address
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The NWA1123 sends packets to the gateway when it
does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
DNS Server IP Enter the IP address of the DNS server.
Address
IPv6 Address
Assignment
Enable Stateless Select this to enable IPv6 stateless auto-configuration on the NWA1123. The NWA1123 will
Address Auto-
generate an IPv6 address itself from a prefix obtained from an IPv6 router in the network.
configuration
(SLAAC)
Chapter 7 Network
NWA1123 Series User's Guide
64