ZyAIR G-3000 User's Guide
Figure 104 Menu 24 System Maintenance
Menu 24 - System Maintenance
Figure 105 Valid CI Commands
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
G-3000> ?
Valid commands are:
sys
ip
G-3000>
19.2 Time and Date Setting
The ZyAIR keeps track of the time and date. There is also a software mechanism to set the
time manually or get the current time and date from an external server when you turn on your
ZyAIR. Menu 24.10 allows you to update the time and date settings of your ZyAIR. The real
time is then displayed in the ZyAIR error logs.
1 Select menu 24 in the main menu to open Menu 24 – System Maintenance.
2 Then enter 10 to go to Menu 24.10 – System Maintenance – Time and Date Setting to
update the time and date settings of your ZyAIR as shown in the following screen.
165
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
exit
ether
bridge
radius
wlan
8021x
Chapter 19 System Maintenance and Information