Step 2 Password And Uplink Connection - ZyXEL Communications NWA1123 Series User Manual

Figure 16 Wizard: Time Zone

4.2.2 Step 2 Password and Uplink Connection

Use this screen to configure the NWA1123's system password and IP address.
Change Password: Enter a new password and retype it to confirm.
Uplink Connection: Select Auto (DHCP) if the NWA1123 is connected to a router with the DHCP server
enabled. You then need to check the router for the IP address assigned to the NWA1123 in order to
access the NWA1123's web configurator again.
Otherwise, select Static IP when the NWA1123 is NOT connected to a router or you want to assign it a
fixed IP address. You will need to manually enter:
• the NWA1123's IP address and subnet mask.
• the IP address of the router that helps forward traffic.
• a DNS server's IP address. The Domain Name System (DNS) maps a domain name to an IP address
and vice versa. The DNS server is extremely important because without it, you must know the IP
address of a computer before you can access it.
Click Prev to return to the previous screen. Click Next to proceed. Click Cancel to close the wizard
without saving.
Chapter 4 Setup Wizard
NWA1123 Series User's Guide
38