Date And Time - ZyXEL Communications HD User Manual

The following table describes the labels in this screen.
Table 65 Configuration > System > Host Name
LABEL
System Name
System Location
Domain Name
Apply
Reset

14.3 Date and Time

For effective scheduling and logging, the NWA/WAC system time must be accurate. The NWA/WAC has
a software mechanism to set the time manually or get the current time and date from an external
server.
To change your NWA/WAC's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NWA/WAC's time and date or
have the NWA/WAC get the date and time from a time server.
Chapter 14 System
DESCRIPTION
Choose a descriptive name to identify your NWA/WAC device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.
Specify the name of the place where the NWA/WAC is located. You can enter up to 60
alphanumeric and '()' ,:;?! +-*/= #$%@ characters. Spaces and underscores are allowed. The
name should start with a letter.
Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes "-" are accepted.
Click Apply to save your changes back to the NWA/WAC.
Click Reset to return the screen to its last-saved settings.
NWA / WAC Series User's Guide
144