Snmp Traps; Configuring Snmp - ZyXEL Communications NWA1123 Series User Manual

administrators collect statistical data and monitor status and performance. You can download the
NWA1123's MIBs from www.zyxel.com.

13.8.2 SNMP Traps

The NWA1123 will send traps to the SNMP manager when any one of the following events occurs.
Table 64 SNMP Traps
OBJECT LABEL
linkDown
linkUp
authenticationFailure

13.8.3 Configuring SNMP

To change your NWA1123's SNMP settings, click Configuration > System > SNMP tab. The screen appears
as shown. Use this screen to configure your SNMP settings. You can also configure user profiles that
define allowed SNMPv3 access.
Figure 97 Configuration > System > SNMP
The following table describes the labels in this screen.
Table 65 Configuration > System > SNMP
LABEL
Enable
Server Port
Trap
Chapter 13 System
OBJECT ID
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
DESCRIPTION
Select the check box to allow or disallow users to access the NWA1123 using SNMP.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
NWA1123 Series User's Guide
147
DESCRIPTION
This trap is sent when the Ethernet link is down.
This trap is sent when the Ethernet link is up.
This trap is sent when an SNMP request comes from non-
authenticated hosts.