Operation
Priority Channel Watch During Group Scan
The feature allows user to monitor the Instant Priority channel (see page 19)
every 1.5 secs during Group Scanning. The Priority Channel can also be
monitored with Dual Watch, see page 19.
1.
Press
three times.
PRI setting flashes.
2.
Press
or
3.
Press and hold
Programming Scan Channels
1.
Select which Scanning Mode you wish to use on the channel OS or GS Mode.
OS is indicated by the absence of the GS icon.
NOTE
2.
Select the channel you want to store by pressing
3.
Press
to store.
M icon appears.
4.
To remove the channel from Memory, Press
M icon disappears.
Drop-Out Delay
While scanning, the radio stops at a busy channel and receives a signal. When
the received signal is over, the unit will wait for 3 seconds for the return of the
signal, otherwise, the radio resumes scanning.
UNIDEN UH720SX-NB/UH710SX-NB
to change the selection.
to save and exit.
18
or
.
to remove.
UHF CB Radio