Scanning Radio Channels - Uniden MHS338BT Owner's Manual

SCANNING RADIO CHANNELS

Scan mode sequentially checks channels that you have saved in memory. You must have at
least two channels saved in memory to start a scan.
08
The radio scans about
To scan channels saved to memory,
press the MEMSCAN soft key.
To scan all channels, press the
ALLSCAN soft key.
The radio scans channels according to your radio settings, including Priority and Weather
Alert watch, if set. If the radio detects a transmission, it stays on that channel; when the
signal stops, the radio resumes scanning. When the radio receives a transmission, it
pauses the scan and stays on the transmitting channel. Press ▲ or ▼to leave that channel
and resume scanning.
To end the scan, press the SCAN soft key. The radio remains on the last scanned channel
The radio stops for a
detected signal
10 11 12
10 channels/second
MHS338BT Radio Owner's Manual
Scan resumes
signal stops
13 14
when the
17
15
E-27