Memory Mode; Save Channels Into Memory; Scan Channels In Memory; Listen To Channels In Memory - Uniden Bearcat 880 CHR Owner's Manual

Press and hold WEATHER to turn Weather Alert on. The WEATHER LED
turns on.

MEMORY MODE

You can select channels to store into memory and then scan only those
channels.

Save Channels Into Memory

1. Tune to a channel in CB mode.
2. Press and hold MEM/SCAN until SAVE appears (about 2 seconds).
3. Release MEM/SCAN.
4. The radio stays on the saved channel.

Scan Channels in Memory

1. From All Channel Scan mode (see page 11), press MEM/SCAN until
MEM SCAN displays; the radio scans memory channels only.
2. Press MEM/SCAN again to return to Memory mode or the last
channel scanned.

Listen to Channels in Memory

1. Press MEM/SCAN until MEM displays.
2. Turn the Channel Selector knob and only saved channels will be
heard.

Clear Channels from Memory

1. In Memory mode, select a channel.
2. Press and hold MEM/SCAN until CLEAR displays.
3. Release MEM/SCAN. The radio plays the next channel in memory.

MENUS

Access menus by pressing MENU/OK. The first menu, COLOR, displays.
Turn the Channel Selector knob to cycle through the other menus:
ƒ COLOR - Backlight color
ƒ CONT - LCD Contrast
ƒ BRIGHT - Brightness
ƒ WXSCAN - Weather Scan mode
13