Using The Remote Control - Directed SmartStart ASRF-3510 User Manual

Using the Remote Control

Your remote starter is equipped with a 5-button multi-channel remote control. It
can operate two independent vehicles equipped with a remote starter (see Multi-
car operation section on page-23). The functions of the transmitter are as
follows:
2-way LED remote
LOCK: Locks the doors
and arms the STARTER
KILL (if installed).
UNLOCK: Unlocks the
doors and disarms the
STARTER KILL (if
installed). Activates the
AUX 1 output if Priority
Door Access is configured.
TRUNK: Opens the
TRUNK or activates the
AUX 3 output.
Note: Trunk option must be
installed.
START/STOP: Remote
starts or stops the engine.
Gets the system into Cold
Weather mode by pressing
the SHIFT button and then
pressing and holding the
START/STOP button for
3 seconds. Note: Icon may
vary.
AUX AUX: This button serves as
a second function button.
This button allows
assigning different functions
to any of the other four
buttons.
P.6
LED
#1
LED
#3
LED
#2
LED
#4
User Guide