Remote-Starting; Driving Off; Remote Starter Features; Remote Door Locks - Directed SmartStart ASRF-3510 User Manual

Remote-starting

1. Press the
2. The remote will beep once.
The remote will confirm the remote starter's activation by beeping
3.
3 times.
If your vehicle does not start at the first attempt, the system will shut down, wait a
few seconds and try to start the engine again. There will be 3 start attempts
before the system gives up.

Driving Off

With the vehicle running remotely, press the
installed) and unlock the doors. Enter the vehicle and do the following:
Turn the ignition key to the IGNITION ON (RUN) position. (Do not turn the
1.
key to the CRANK position while the engine is running. This would
cause the starter motor to re-engage.)
2. Press the brake pedal to disengage the remote starter unit.
You are now ready to drive off.
Note: On some Push-To-Start (PTS) vehicles, no takeover is possible as
pressing the brakes will shut the engine down. Please talk to your technician to
determine if the "Takeover mode" can be set for your vehicle.

Remote Starter Features

Remote Door Locks

If your Remote Car Starter was installed with the Remote Door Locks option, you
will have the convenience of remote keyless entry.
To LOCK your doors and ARM the system:
1. Press and hold the
2. The remote will beep once to confirm locking of the doors.
User Guide
button for approximately 1 second and release.
button for approx. 1 sec.
button to disarm the starter kill (if
P.11