Table of Contents
Advertisement
THE 1-WAY / 2-WAY 1-BUTTON REMOTE CONTROL
721-TX
Your remote control works off two small 3-Volt lithium batteries
(CR2016).
When replacing the batteries, make sure to place the new batteries in the
upright position (see illustration). Make sure to put the small isolating
strip back.
See your dealer for replacement batteries or additional remote controls.
The range of your remote control can be affected by a weak battery, interference from nearby
metal structures, hydro poles, or crowded parking lots.
With its electronic CODE LEARNING feature, up to four remote controls can be programmed for
your vehicle.
USING YOUR REMOTE CONTROL
721-TX: the remote control determines the commands to be transmitted depending
on the amount of time the button is pressed. Refer to the table below.
Indicator light will flash (orange for 721-TX) while transmitting the command.
Remote included in kit may differ from the one illustrated.
COMMANDS
Engine
COMMAND
status
Unlock
ON
Start
OFF
Stop
ON
711-TX
AF-RFK712 (1-way remote)
Step
Remote LED confirmation
Press and
hold for
2 seconds
Press and
hold for
2 seconds
Press and
hold for
5 seconds
Unlock button
Remote Start/Stop
Remote
sound
confirmation
N/A
N/A
N/A
5
Advertisement
Table of Contents
