Using The Remote Control - Directed AstroStart RS-625 User Manual

Using the Remote Control

Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two
independent vehicles equipped with a remote starter (see Multi-car operation section on page-
15). The functions of the transmitter are as follows:
2-way LED remote (used on RS-625 only)
LOCK: Locks the doors and
arms the STARTER KILL (if
installed).
UNLOCK: Unlocks the doors
and disarms the STARTER
KILL (if installed). Activates
the AUX 1 output if Priority
Door Access is configured.
TRUNK: Opens the TRUNK
or activates the AUX 3 output.
Note: Trunk option must be
installed.
START/STOP: Remote starts
or stops the engine. Gets the
system into Cold Weather
mode by pressing the SHIFT
button and then pressing and
holding the button for
3 seconds.
AUX (upper right side): This
button serves as a second
function button.
AUX
This button allows assigning
different functions to any of
the other four buttons.
P.4
LED
#1
(lock)
LED
#3
(trunk)
User Guide
LED #2
(unlock)
LED #4
(start)