Multi-Car Operation; Oem-Style Alarm - Directed SmartStart ASRF-3510 User Manual

Multi-car Operation

This option allows the owner of two vehicles, both equipped with the same
Remote Car Starter model, to control both systems with a single remote control.
To control the second vehicle:
Press TRUNK + LOCK buttons simultaneously: --------------------LOCK
Press TRUNK + UNLOCK simultaneously: ---------------------------UNLOCK
Press TRUNK + START/STOP simultaneously: ---------------------START
Press TRUNK + START/STOP simultaneously: ---------------------STOP
Press AUX  AUX  TRUNK: -------------------------------------------TRUNK
OR
Press AUX  AUX  LOCK: ---------------------------------------------LOCK
Press AUX  AUX  UNLOCK: -----------------------------------------UNLOCK
Press AUX  AUX  START/STOP: ----------------------------------START
Press AUX  AUX  START/STOP: ----------------------------------STOP
Press AUX  AUX  TRUNK: -------------------------------------------TRUNK
Note: If the multi-level features have been modified from their default state by
your installer, the AUX button may have to be pressed once, twice or three times,
according to the option you chose.

OEM-Style Alarm

The OEM-style alarm (if configured by your installer) monitors the doors, hood
and ignition switch of your vehicle. It will sound the horn if a door or the hood is
opened, or if the key is turned into the IGNITION ON position.
To arm the OEM-style alarm, press the

The OEM-style alarm will ONLY arm if the
is pressed.

The LED on the antenna will flash slowly to indicate that the OEM-style
alarm is now armed.
To disarm the OEM-style alarm, press the

To stop the horn from sounding if the OEM-style alarm is triggered,
press the
(See page 13).
User Guide
or button, or put the system in and out of Valet Mode
button on the transmitter.
button on the transmitter
button on the transmitter.
P.23