Extended Run Time - Directed SmartStart ASRF-3510 User Manual

4. While the
remote beeps once, pause, then beeps twice.
5. Release the
To enter Cold Weather Mode (1-way remote):
Rapidly press AUX twice. The remote's LED will start flashing.
1.
2. Press and hold
pause, and then flash 3 times.
To exit Cold Weather Mode, do any one of the following actions:
1. Open the hood.
2. Start the engine remotely.
Turn the ignition key to the IGNITION ON (RUN) position.
3.
4. Press and release the AUX button.
5. The
6. While the
remote beeps once, pause, then beeps once again.
7. Release the
(1-way remote) Rapidly press AUX twice. The re mote's LED will start
8.
flashing. Press and hold
pause, and then flash twice.
To verify whether the system is in Cold Weather Mode:
1. (Automatic transmissions only) Press the brake pedal: If the
vehicle is in Cold Weather mode, the parking lights will remain ON
while the brake pedal is pressed.
2. Do the vehicle status request feature (page 24).

Extended Run Time

While the vehicle is running under a remote start, press and hold the
until the remote beeps. This will reset the run time counter to zero and restart the
run time cycle from the beginning.
P.16
button is still lit, press and hold the
button. Its LED will flash quickly.
until the parking lights will flash for 2 seconds,
button on the transmitter will light up.
button is still lit, press and hold the
button. Its LED will flash quickly.
until the parking lights flash for 2 seconds,
button until the
button until the
button
User Guide