Directed SmartStart ASRF-3510 User Manual page 14

To put the system into Valet Mode
Using the KEY (Ignition Valet Mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., cycle the
ignition key to the IGNITION/RUN and OFF positions 5 times until the
parking lights flash 3 times.
2. Turn the ignition OFF.
3. The LED on the antenna will stay ON indicating that the vehicle has
successfully entered Valet mode.
Using the TRANSMITTER (Remote Valet Mode):
1. Press and hold the
remote beeps once, pauses, then beeps once again. Release the
buttons.
2. The
3. The LED on the antenna will stay ON indicating that the vehicle has
successfully entered Valet mode.
To take the system out of Valet Mode
Using the KEY (Ignition Valet Mode):
1. Insert the ignition key into the ignition switch. Within 10 sec., cycle the
ignition key to the IGNITION/RUN and OFF positions 5 times until the
parking lights flash twice.
2. Turn the ignition OFF.
3. The LED on the antenna will flash rapidly, indicating that the vehicle
is now out of Valet mode.
Using the TRANSMITTER (Remote Valet Mode):
1. Press and hold the
remote beeps once, pauses, then beeps once again. Release the
buttons.
2. The
3. The LED on the antenna will flash rapidly, indicating that the vehicle
is now out of Valet mode.
P.14
and
and buttons will flash 3 times.
and
and button will flash 3 times.
buttons simultaneously until the
buttons simultaneously until the
User Guide