Limit Operation; Actions When Activated; Scan Time - Honeywell SC500 Manual

9.3 Limit Operation

9.3.1 Actions When
Activated

9.3.2 Scan Time

page 46 008-0671-00
When one of the Limits are activated, the following actions occur:
• The front panel indicator on the display will illuminate.
• The Relay corresponding to the Limit will activate.
The "scan time" or update rate of the limits depends on how many channels are
installed in the instrument. To determine the scan time of the limits for your particular
instrument, see "SCAN TIME Menu Item" on page 35.