Specifications - Honeywell SC500 Manual

10.4 Specifications

page 56 008-0671-00
TRANSDUCER INPUT
Transducer type
Excitation Supply
Excitation Overcurrent Protection
Transducer full-scale output
Amplifier Gain Selection
Calibration Type
Differential Input Voltage
A/D Converter
Low-pass filter
Resolution and Frequency Response
INSTRUMENT-ONLY ACCURACY
(Frequency Response setting<=16Hz; Linearity, repeat-
ability & hysteresis)
mV/V Calibration
Known Load Calibration
AUXILLIARY INPUTS
Response Time
Field-Selectable Functions
DIGITAL-TO-ANALOG OUTPUT
Output voltage range
Frequency Response
full-bridge, strain gage
5 VDC @ 60 mA max.
0.5 mV/V to 21.0 mV/V
2-, 3- or 5- point known load
+/- 105 mV (max.)
24-bit Sigma-Delta
digital, 24-tap FIR
see "FREQ. RESPONSE Menu Item" on
Quantity
Type momentary contact closure
peak/valley clear, peak/valley hold,
Availibility
5, ±5, 10 or ±10 VDC (field selectable)
Source any channel's track, peak or valley value
Isolation
Resolution
same as input when driven by the same
channel's tracking data
yes
automatic
shunt, mV/V or
page 57
±0.1% F.S.
±0.01% F.S.
2
< 5ms
tare on, tare off,
track hold
with Option 58i
500V
14 bits