Cleaning; Power Connector; Wall-Mount Ac Power Adapter - Honeywell SC500 Manual

4.3.8 Cleaning

4.3.9 Power Connector

4.3.10 Wall-Mount AC
Power Adapter
page 30 008-0671-00
CAUTION
Turn off the instrument and unplug all connectors. Do not allow any cleaner
inside the instrument.
Failure to comply with these instructions may result in product damage.
Use a soft cloth or tissue and a mild cleaner. Do not use liquid or aerosol cleaners.
The Power connector is for the application of DC power only as specified in "Specifica-
tions" on page 26. The Power connector pinout is shown below:
Table 4-3: Power Connector of Model SC500
Pin Label
tip +
ring -
-
Figure 4-4: Power Connector of Model SC500
9.5 mm
Figure 4-5: Mating Plug for Model SC500 Power Connector
If the instrument will be powered by a DC power supply instead of the wall-mount AC
power adapter, a mate for the Power connector may be purchased by part number
023-0769-01.
Only the specified wall-mount AC power adapter (order code AA961) should be used.
This universal wall-mount power supply includes interchangable plugs for use in the
Americas, Europe, the United Kingdom and Australia.
Function
(+)Supply
(-)Supply
+
O.D. = 5.5 mm
I.D. = 2.1 mm