Table of Contents
Advertisement
READER MODE TIME SCHEDULE
READER #1 MODE TIME SCHEDULE
There are 2 reader modes (in READER #1) including ID Mode and ID+PW Mode. Unless otherwise set
specifi cally, all registered users should be verifi ed according to the reader mode in use. However you may allow
entry with card only during a certain time interval for all users.
For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the
password verifi cation method for the rest of the time. You can do so by setting [READER1 MODE SETTING] to
ID+P/W mode which will be general operation mode, and program a time schedule code "01" so that it can
include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule
Code 01 to READER1 MODE Time Schedule setting.
F 4
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
3.
Use the numeric buttons to enter 2-digit code and press
•
T/S(Time Schedule) CODE : 00~10
•
If the entry is incorrect, the "INVALID NUMBER" message will appear.
•
The T/S Code "00" indicates no Time Schedule is to be applied.
READER #2 Mode Time Schedule
There are 2 reader modes (in READER #2) including ID Mode and ID+P/W Mode. Unless otherwise specifi ed, all
registered users should be authenticated to the reader mode in use. However you may allow entry with card
only during a certain time interval for all users.
For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the
Fingerprint Verifi cation method for the rest of the time. And, you can do so by setting [READER2 MODE
SETTING] to ID+P/W Mode which will be general operation mode, and program a T/S Code "01" so that it can
include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule
Code 01 to the READER2 MODE Time Schedule setting.
F 4
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
.
ENT
•
It can be confi gured in the same way as READER#1 Mode Time Schedule
setting.
6
and
to move to the RD1 MODE
6
and
to move to RD2 MODE
T/S item and
4.RD1 MODE
.
ENT
4.RD1 MODE
T/S and press
5.RD2 MODE
T/S
00
T/S
10
T/S
00
English51
Advertisement
Table of Contents
