Table of Contents
Advertisement
additional features
COMMUNICATION TEST
Before executing this test, remember to connect the RS232 TX wire (Black wire with White stripe) and the RS232 RX
wire (Red wire with White stripe) together. This is to test on the built-in communication chip, not on the communication
with the computer.
1.
Press the
F 9
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
•
TX DATA : Transmit Data
RX DATA : Receive Data
3.
Press
ENT
to start the test.
4.
Please see the pictures below for the screens when the test has succeeded
and failed.
< If the test has succeeded >
TEST PASSED!!!
PRESS ANY KEY...
5.
Press any key to move to the parent menu.
M
If the communication is malfunctioning, the "TEST FAILED!!!" message will be displayed.
If this is the case, contact the nearest Samsung Service Center for technical support.
60_ Additional Features
6
and
to move to the COMM TEST item and
< If the test has failed >
TEST FAILED!!!
PRESS ANY KEY...
8.COMM TEST
TX DATA = 0
RX DATA = 0
Advertisement
Table of Contents
