Auxiliary Input #1 Setup; Auxiliary Input #2 Setup - Samsung SSA-S2101 User Manual

I/O time setup

AUXILIARY INPUT #1 SETUP

F 5
1. Press the SETUP MENU button.
4
2. Use the buttons
press .
ENT
3. You can make input when the prompt blinks.
•
Use the keypad to enter the time for each output operation and press
DR : Door relay output
AR : Alarm relay output
T1 : TTL #1 output
T2 : TTL #2 output
BZ : Buzzer output

M
The output time differs, depending on the time unit.
If the time unit is 0.1 (second), you can specify the value between 0.0 and 9.8 second; if set to 1 (second), you can
specify between 0 and 98 seconds.
For the time unit, refer to the 'Time Unit Setup' under the advanced setup. (see page 50)

If you enter 99 for the value, the product stays in output mode until you change the setting regardless of the time
unit.

AUXILIARY INPUT #2 SETUP

1. Press the F 5 SETUP MENU button.
4
2. Use the buttons
press ENT .
3. You can make input when the prompt blinks.
•
Use the keypad to enter the time for each output operation and press
DR : Door relay output
AR : Alarm relay output
T1 : TTL #1 output
T2 : TTL #2 output
BZ : Buzzer output

M
The output time differs, depending on the time unit.
If the time unit is 0.1 (second), you can specify the value between 0.0 and 9.8 second; if set to 1 (second), you can
specify between 0 and 98 seconds.
For the time unit, refer to the 'Time Unit Setup' under the advanced setup. (see page 50)

If you enter 99 for the value, the product stays in output mode until you change the setting regardless of the time
unit.
38_
I/O Time Setup
6
and to move to the AUX INPUT #1 item and
6
and to move to the AUX INPUT #2 item and
3.AUX INPUT#1
D R A R T 1 T 2 B Z
0 0 0 0 0 0 0 0 0 0
.
ENT
3.AUX INPUT#1
D R A R T 1 T 2 B Z
_ 0 0 0 0 0 0 0 0 0
4.AUX INPUT#2
D R A R T 1 T 2 B Z
0 0 0 0 0 0 0 0 0 0
.
ENT
4.AUX INPUT#2
D R A R T 1 T 2 B Z
_ 0 0 0 0 0 0 0 0 0