Table of Contents
Advertisement
WIEGAND OUTPUT SETUP
F 2
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
and press
.
ENT
4
3.
Use the buttons
.
ENT
•
USE : It sends 26 bit Wiegand Output (34 bit for SSA-S2101 series)
through two TTL output ports (TTL OUT #1, TTL OUT #2), which
can be used as a reader in connection with other controller.
NOT USE : This product cannot be used as a reader.
M
When it is set to 'USE', the TTL #1 and TTL #2 outputs are disabled except for WIEGAND Outputs.
VOICE VOLUME SETUP
F 3
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
3.
When done, press
ENT
•
You can adjust the volume of the voice in 5 levels from 0 (mute) to 4
(maximum)
M
Adjust the volume level to "0" to disable voice output.
If you enter a value higher than '5', the "INVALID NUMBER" message appears
and the volume stays at the previous setting.
6
and
to move to the WIEGAND OUTPUT item
6
and
to select either USE or NOT USE and press
6
and
to move to VOICE VOLUME and press
to save your settings.
7. WIEGAND OUTPUT
NOT USE
7. WIEGAND OUTPUT
NOT USE
7. WIEGAND OUTPUT
USE
ENT
1.VOICE VOLUME
VOLUME : 0
1.VOICE VOLUME
VOLUME : _
1.VOICE VOLUME
VOLUME : _
English55
Advertisement
Table of Contents
