additional features
ONE TIME READ
If the menu is set to "USE", the card authentication will not take place for the next 30 seconds after an instance of
authenticating a registered card.
1.
Press the
F 3
SETUP MENU button.
4
2.
Use the buttons
.
ENT
4
3.
Use the buttons
.
ENT
•
USE : The card authentication will not take place for 30 seconds after an
instance of authenticating a registered card.
For unregistered cards, the authentication process will be
attempted repeatedly.
When another registered card is successfully authenticated within
30 seconds from the first normal authentication by a registered
card, it is possible to authenticate the first card again not requiring
the time lag of 30 seconds.
NOT USE : Continuous re-authentication of a registered card is enabled.
M
The default setting for One Time Read is "NOT USE".
VERSION CHECK
1.
Press the
F 9
SETUP MENU button.
4
2.
Use the buttons
ENT
.
3.
The fi rmware version of the unit is displayed.
56_ Additional Features
6
and
to move to ONE TIME READ and press
6
and
to select either USE or NOT USE and press
6
and
to move to FIRMWARE VER and press
4.ONE TIME READ
NOT USE
4.ONE TIME READ
NOT USE
1.FIRMWARE VER.
SSA-S3010
v0.50_090803