user management
REGISTERING ID IN QUICK MODE
To register ID
1.
Press the
SETUP MENU button.
F12
4
2.
Use the buttons
press
.
ENT
3.
Use one of the following two ways to enter an ID:
•
Place the card on the main unit to display the card ID on the screen.
•
Use the keypad to enter the number and press
4.
Enter the password and press
5.
ID registration is completed.
•
Registering in Quick mode will set TA and TB to 00, and RD, MA, MB, LV to
0. (Refer to page 31.)
28_
User Management
6
and
to move to the REGISTRATION item and
ENT
.
ENT
(QUICK MODE)
1. REGISTRATION
.
1. REGISTRATION
ID:_
ENTER PIN
PUT ID CARD
1. REGISTRATION
ID:12345678
PASS WORD:_
ID REGISTERED!