Table of Contents
Advertisement
Selecting the Automatic Operating Mode
In the Automatic mode, the room temperature and the
fan speed are controlled automatically.
1
If necessary, press
Result:
:
The On/Off indicator on the function
controller comes on.
The air conditioner runs in the mode
selected when the unit was last used.
IMPORTANT
The air conditioner is fitted with a
protection mechanism to prevent the unit
from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the AUTO mode, press the Mode button until
is displayed at the top of the function controller.
Result:
:
The air conditioner runs in AUTO mode.
You can change modes at any time.
N
N
o
o
t
t
e
e
3
To adjust the temperature, press the Temperature buttons
one or more times until the required temperature is
displayed. Possible temperatures are between 18ºC and
30ºC inclusive.
Result:
Each time you press Temperature buttons:
- The temperature is adjusted by 1ºC.
The air conditioner starts cooling, provided
that the room temperature is than the
selected temperature.
- The quantity of air is adjusted automatically.
(ON/OFF) button.
7
E-
Advertisement
Table of Contents
