Table of Contents
Advertisement
advanced setup
ANTIPASSBACK MODE
Antipassback mode is used to prevent an identical user from entering or exiting the door twice or more consecutively. This
mode is available only with an Exit reader dedicated to detecting exits, which is not available in a system that is solely using
the Exit button to exit the door.
1.
Press the
F 2
SETUP MENU button.
4
2.
Use the buttons
.
ENT
4
3.
Use the buttons
•
NOT USE : The Antipassback mode is disabled.
USE : The Anti-Pass Back mode is enabled.
ALL CLEAR! : If entrance or exit is not allowed because of violation of the
Anti-Pass Back rules, this will reset the status and resume
allowing users to enter or exit the door.
M
The Antipass back mode is set to "NOT USE" by default.
You can confi gure the APB error outputs for each reader on the entrance and exit. (Refer to "Antipassback Error
Output Setup" at pages 46 and 49.)
TIME SCHEDULE SETUP
You can set a total of 10 Time Schedule codes. The default code is "00", which is used to allow unlimited access.
Each Time Schedule code has 8 programmable days (Sunday through Saturday, and a holiday), each of which has 5 time
intervals.
You can check information such as Time Schedule code, day of the week, time interval and current Time Schedule setting.
A holiday in the Time Schedule is linked to a holiday schedule code.
The Time Schedule is based on 24-hour format and therefore "00:00" and "24:00" refer to
the same time.
F 4
1.
Press the
SETUP MENU button.
4
2.
Use the buttons
press
.
ENT
4
6
3.
Use the
and
code and press
ENT
•
T/S CODE : Time Schedule Code 01~10
Weekly : 8 days (HOL,SUN,MON,TUE,WED,THU,FRI,SAT)
INTERVAL : Time interval 1~5
00:00 – 00:00 : hour : min
48_
Advanced Setup
6
and
to move to the APB MODE item and press
6
and
to select a desired mode and press
6
and
to move to the TIME SCHEDULE item and
8
2
,
,
buttons to specify the interval, day and
.
5.APB MODE
NOT USE
.
ENT
5.APB MODE
USE
5.APB MODE
ALL CLEAR!
1.TIME SCHEDULE
T/S CODE: 01 HOL
INTERVAL:
1
00:00 – 00:00
1.TIME SCHEDULE
T/S CODE: 10 SAT
INTERVAL:
1
00:00 – 00:00
1.TIME SCHEDULE
T/S CODE: 01 SUN
INTERVAL:
5
12:10 – 15:59
Advertisement
Table of Contents
