First Time User Setup - Samsung RMC30D1 User Manual

First Time User Setup

The default setup screen appears when your Touch Control is turned on for the fi rst
time. To connect the Touch Control to the TV, you must complete the following steps.
1
2
3
4
5
6
RMC30D1_ZA]BN68-03328B-00L03.indb 5
Turn on TV.
• The Touch Control uses IR signals. Point the Touch Control at the IR sensor on
the TV when you press a button.
Select the desired Language and tap <Next>.
Language
Language
English
Please turn on TV.
Next
Keep within 10inches (25cm) between Touch Control and center of Samsung
TV. Tap <Next>.
• It may take about one minute to connect TV. If the connection fails, check the
wireless settings on the TV and try again.
• If the connection fails few times, tap <Skip> and refer to "Setting up the network"
(p. 7).
Tap <OK>.
You can see the Gesture Guide. Tap <Next>.
You can continue to initialize the TV using Touch Control.
• For initial TV settings, refer to the TV manual.
TV Connection
Connecting Touch Control and
TV. Please place the Touch
Control and TV within 25cm and
then press the next button.
Previous Next Skip
TV Connection TV Connection
Connecting Touch Control and
TV. Please place the Touch
Control and TV within 25cm and
then press the next button.
Select Allow on TV to
connect with Touch Control.
OK
Previous Next Skip
5
2011-01-11 오후 3:4