Ptz Mode; Ptz Setup Mode - Samsung SCC-3000 User Manual

PTZ Mode

(1) PTZ Setup Mode

■ This menu is for setting up the PTZ camera function.
It is impossible to operate Speed Dome and DVR by sub-controllers
when the master controller is set to on.
① At the initial screen, press the Function button and press the 0 button
to activate the [SETUP SYSTEM] menu.
② Press the 1 button to activate the [PTZ SETUP 1 ▶] menu.
③ Press the ▶▶ button to activate the [◀ PTZ SETUP 2] menu.
INFORMATION
● The menu may be different depending on the PTZ camera model.
Menu
PRESET
SWING
GROUP
TOUR
● Press the ESC button to move to an upper setup mode.
Models supported
SPD series, PELCO-D, PANASONIC,
SAMSUNG ELECTRONICS
SPD series
SPD series
SPD series
SETUP SYSTEM
1:PTZ
3:CONTROLLER
Press Numeric Key
PTZ SETUP 1
1:PRESET
3:GROUP
Press
PTZ SETUP 2
1:MODEL
3:AF
Press Numeric Key
Menu Models supported
SPD series, PELCO-D, PANASONIC,
MODEL
SAMSUNG ELECTRONICS
SPD series, PELCO-D,
TRACE
PANASONIC
SPD series, PELCO-D, PANASONIC,
AF
SAMSUNG ELECTRONICS
-
2:DVR
2:SWING
4:TOUR
Numeric Key
2:TRACE
-
《15》