Table of Contents
Advertisement
INPUT TEST
This feature allows you to test settings for each input.
1.
Press the
F 9
SETUP MENU button.
4
2.
Use the buttons
.
ENT
3.
The corresponding value changes upon input.
•
0 : It indicates that the input port is open circuit.
1 : It indicates that the input port is short circuited at the earth-grounding
level.
2 : It indicates that the corresponding port is not connected.
•
EX : Exit Button Input
DC : Door Contact Sensor Input
I1 : Auxiliary Input #1
I2 : Auxiliary Input #2
TP : Tamper Switch Input
OUTPUT TEST
This feature allows you to test settings for each output.
1.
Press the
F 9
SETUP MENU button.
4
2.
Use the buttons
3.
Press
ENT
to turn ON/OFF the DOOR REALY, ALARM RELAY, TTL#1,
TTL#2, BUZZER in sequence.
•
DOOR REALY
ALARM RELAY
TTL#1
TTL#2
BUZZER
4.
Press any key to move to the parent menu.
M
The fi rst two tests verify if the output relays (Door Relay and Alarm Relay) are
working properly. You can hear the mechanical sound of relay with a blinking
LED indicator.
The next two tests are to verify TTL#1 and TTL#2 outputs. Finally, the last test is
for an Internal Buzzer test. You can hear two beeps during the test.
6
and
to move to the INPUT TEST item and press
6
and
to move to OUTPUT TEST and press
(ON/OFF)
(ON/OFF)
(ON/OFF)
(ON/OFF)
(ON/OFF)
2.INPUT TEST
EX DC I1 I2 TP
2
2 2
2 0
2.INPUT TEST
EX DC I1 I2 TP
2
2 2
2 0
ENT
3.OUTPUT TEST
3.OUTPUT TEST
DOOR RELAY
ON
3.OUTPUT TEST
DOOR RELAY
OFF
PRESS ANY KEY...
English57
Advertisement
Table of Contents
