Philips SCF870/23 Manual page 14

EngliSh
14
Environment
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment.
Storage
1 Empty the water tank before you store the appliance.
2 Make sure all parts are clean and dry before you store the appliance (see chapter 'Cleaning').
3 Store the appliance with the blade unit in the jar to prevent damage.
4 Do not place the lid on the jar and leave the lid of the filling opening open to avoid bacterial
growth.
guarantee and service
If you need service or information or if you have a problem, please visit the Philips AVENT website
at www.philips.com/AVENT or contact the Philips Consumer Care Centre in your country (you find
its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The appliance
does not work.
The steaming light
does not go on.
Possible cause
The appliance is
equipped with a safety
lock. If the parts have
not been assembled
properly onto the
motor unit, the
appliance does not
work.
The appliance is not
connected to the
mains.
The jar is not properly
placed on the motor
unit.
You want to start a
second steaming
process just after one
has finished.
Solution
Assemble all parts properly. See chapter 'Using the
appliance'.
Put the plug in the wall socket.
Place the jar properly on the motor unit.
Switch off the appliance and allow it to cool down
for a few minutes before you start a second
steaming process.