Keypad Buttons & Functions - FLIR ThermaCAM P65 User Manual

9.2 Keypad buttons & functions
Figure 9.7 Camera buttons – explanations
Button
ON/OFF
A
S
C
Joystick
+/–
F1
Publ. No. 1557954 Rev. a155 – ENGLISH (EN) – February 7, 2006
Comments
Press briefly to switch on the camera
■
Press and hold down for a few seconds to switch off the camera
■
Press briefly to autoadjust the camera
■
Press and hold down for a few seconds autofocus the camera
■
Press briefly to freeze an image
■
Press briefly to store an image if the image is currently frozen
■
Press and hold down for a few seconds to store without freezing
■
the image
Press to move between panes in some dialog boxes
■
Press to leave freeze mode and go to live mode
■
Press to leave dialog boxes without changing any settings
■
Press twice to leave edit mode
■
If the camera is in manual adjust mode, press to change the
■
function of the joystick to level (up/down) and span (left/right)
Press to display the menu system
■
Press to exit the menu system
■
Press to confirm selections and leave dialog boxes
■
Press to select measurement markers
■
Move up/down or left/right to navigate in menus, dialog boxes,
■
and on the screen
Move up/down or left/right to move or resize measurement
■
markers
Move up/down to change focus and left/right to zoom
■
If the camera is in manual adjust mode, press C to change the
■
function of the joystick to level (up/down) and span (left/right)
Programmable functions:
Focus
■
Zoom
■
Level
■
Span
■
Programmable functions:
None
■
Adjust once
■
Auto focus
■
Reverse palette
■
Next palette
■
Visual/IR
■
Update ref temp
■
9 – Camera overview
9
75