Main - NEC Express5800 Series Maintenance Manual

Chapter 2 Useful Features

1.2.1 Main

If you start up the SETUP utility, the Main menu is displayed first.
For details about the options, see the table below.
Option
BIOS Information
BIOS Version
Build Date
Access Level
Memory Information
Total Memory
System Language
System Date
System Time
Parameter
–
Information Only
MM/DD/YYYY
[Administrator]
User
–
Information Only
[English]
Français
Español
Deutsch
Italiano
WWW MM/DD/YYYY
HH:MM:SS
Tips Be sure to confirm that the date and time in the BIOS parameters are correctly configured.
Check the system clock monthly. Additionally, if you implement the server in a system that
requires highly accurate time, use of a time server (an NTP server) is recommended.
If the system time becomes considerably slow or fast over time even though you regularly
adjust it, contact the dealer where you purchased the server or the maintenance service
company for maintenance.
Express5800/E120e-M Maintenance Guide
Descriptions
–
The BIOS version is displayed (display only).
The BIOS build date is displayed (display only).
The current access level (Administrator or User) is
displayed (display only).
If no password is set, Administrator is displayed.
The total capacity of installed memory is displayed
(display only).
Select a display language for SETUP.
If you run SETUP with BIOS Redirection Port enabled
(other than Disabled), English is automatically selected.
At that time, you cannot change setting of System
Language.
If BIOS Redirection Port is set to Disabled, the
language set in this option is used at the next startup of
SETUP, and you can change the language setting.
Set the system date.
Set the system time
1. System BIOS
[ ]: Factory settings
55