Main - NEC Express5800 Series Maintenance Manual

Chapter 2 Convenient Features

1.2.1 Main

If you start up the SETUP utility, the Main menu is displayed first.
The table below shows the items you can configure on the Main menu.
Option
BIOS Information
BIOS Version
Build Date
Access Level
Memory Information
Total Memory
System Date
System Time
Parameter
–
Information Only
MM/DD/YYYY
[Administrator]
User
–
Information Only
WWW MM/DD/YYYY
HH:MM:SS
Tips
Be sure to confirm that the date and time in the BIOS parameters are correctly configured.
In any of the following situations, check the system time before using the server.
•
After transporting the server
•
After removing the server from storage
•
After the server wakes up from hibernating in an environment out of the guaranteed
operating range (temperature: 10°C to 35°C; humidity: 20% to 80%
Check the system clock monthly. Additionally, if you implement the server in a system that
requires highly accurate time, use of a time server (an NTP server) is recommended.
If the system time becomes considerably slow or fast over time even though you regularly
adjust it, contact the dealer where you purchased the server or the maintenance service
company for maintenance.
Express5800/B120e-h Maintenance Guide
Descriptions
–
Displays the BIOS version (display only).
Displays the BIOS build date (display only).
Displays the access level of the login user, administrator
or user (display only).
If no password is specified, Administrator is displayed.
–
Displays the basic memory capacity (display only).
Set the system date.
Set the system time
1. System BIOS
[ ]: Factory settings
57