NEC Express5800 Series Maintenance Manual page 115

Chapter 3 Appendix
Error Message
9041 Detected CPU Error on CPU
#1
9042 Detected CPU Error on CPU
#2
9060 PEI_CPU_MISMATCH
9080 Link in Slow Speed Mode
between CPU1 and CPU2.
9081 Link Failure between
CPU1 and CPU2.
9082 Link width Error between
CPU1 and CPU2.
9E80 Forced to use CPU with
error.
A001 Memory Error detected in
CPU1_DIMM1
A002 Memory Error detected in
CPU1_DIMM2
A003 Memory Error detected in
CPU1_DIMM3
A004 Memory Error detected in
CPU1_DIMM4
A005 Memory Error detected in
CPU1_DIMM5
A006 Memory Error detected in
CPU1_DIMM6
A007 Memory Error detected in
CPU2_DIMM1
A008 Memory Error detected in
CPU2_DIMM2
A009 Memory Error detected in
CPU2_DIMM3
A00A Memory Error detected in
CPU2_DIMM4
A00B Memory Error detected in
CPU2_DIMM5
A00C Memory Error detected in
CPU2_DIMM6
A800 Memory not detected
A804 Latest memory module is
corrupted.
AE01 CPU1_DIMM1 has been
disabled.
AE02 CPU1_DIMM2 has been
disabled.
AE03 CPU1_DIMM3 has been
disabled.
Cause
An error was detected on CPU #1.
An error was detected on CPU #2.
CPU #1 and #2 are not the same
type.
Low speed mode was detected on
the bus between CPU1 and CPU2.
Link failure was detected between
CPU1 and CPU2.
Link width Error between CPU1 and
CPU2 was detected.
An error was detected in CPU, but
the CPU was forcedly enabled.
An error was detected in
CPU1_DIMM1.
An error was detected in
CPU1_DIMM2.
An error was detected in
CPU1_DIMM3.
An error was detected in
CPU1_DIMM4.
An error was detected in
CPU1_DIMM5.
An error was detected in
CPU1_DIMM6.
An error was detected in
CPU2_DIMM1.
An error was detected in
CPU2_DIMM2.
An error was detected in
CPU2_DIMM3.
An error was detected in
CPU2_DIMM4.
An error was detected in
CPU2_DIMM5.
An error was detected in
CPU2_DIMM6.
No valid memory is not installed.
An error was detected in BIOS Flash
ROM.
A memory error was detected.
CPU1_DIMM1 has been disabled.
A memory error was detected.
CPU1_DIMM2 has been disabled.
A memory error was detected.
CPU1_DIMM3 has been disabled.
Express5800/E120e-M Maintenance Guide
1. POST Error Message
Solution
Check if DIMMs are properly installed. If the
same error is detected repeatedly, contact
your sales representative.
Contact your sales representative.
Contact your sales representative.
115