NEC Express5800 Series Maintenance Manual page 114

Chapter 3 Appendix
Error Message
8006 System configuration
data cleared by Jumper.
8007 SETUP Menu Password
cleared by Jumper.
8020 BIOS update error.
8021 Recovery jumper is set,
but recovery images is
not found.
8800 DXE_NB_ERROR
8801 DXE_NO_CON_IN
8802 DXE_NO_CON_OUT
PEI_DXE_CORE_NOT_FOUND BIOS Flash ROM failed.
8803
8804 PEI_DXEIPL_NOT_FOUND
8805 DXE_ARCH_PROTOCOL_NOT_
AVAILABLE
8806 PEI_RESET_NOT_AVAILABL
E
8807 DXE_RESET_NOT_AVAILABL
E
8808 DXE_FLASH_UPDATE_FAILE
D
8830 PEI_RECOVERY_NO_CAPSUL
E
8831 PEI_RECOVERY_PPI_NOT_F
OUND
8832 PEI_RECOVERY_FAILED
9000 Unsupported CPU
detected
9001 Unsupported CPU
detected on CPU #1
9002 Unsupported CPU
detected on CPU #2
9021 Unsupported CPU Speed
detected on CPU #1
9022 Unsupported CPU Speed
detected on CPU #2
9040 PEI_CPU_SELF_TEST_FAIL
ED
114
Cause
The system configuration data was
cleared by the jumper.
The password set in SETUP was
cleared by the jumper.
BIOS update failed.
Recovery jumper is set, but recovery
of BIOS failed.
An error was detected during
initialization of chipset.
An error was detected during
initialization of console.
The system was not reset correctly.
Failed to write in BIOS Flash ROM.
Failed to recover BIOS Flash ROM.
An unsupported CPU was detected.
A CPU of which clock speed is
unsupported was detected.
An error was detected in CPU
initialization.
Express5800/E120e-M Maintenance Guide
1. POST Error Message
Solution
Follow the steps described in Chapter 1 (7.
Resetting and Clearing the Server).
Start SETUP, and then setup each item
again.
If the same error is detected repeatedly in
spite of re-setting, contact your sales
representative.
This error message also appears when
lithium battery is removed.
Follow the steps described in Chapter 1 (7.
Resetting and Clearing the Server).
Run SETUP and set your password again.
If the same error is detected repeatedly in
spite of re-setting, contact your sales
representative.
If the same error is detected repeatedly, take
measures by referring the error information
in BIOS release note, or contact your sales
representative.
Contact your sales representative.
Contact your sales representative.